Production£º

DATASHEET PDF

SS543AT.pdf

FEATURES/BENEFITS
. Wide temperature and voltage ranges for design flexibility and harsh (automotive)environments.
. Temperature compensated for consistent operation with low-cost magnets (SS500).
. SS5 Package is resistant to thermal and mechanical stress.
. SS5 profile is lower than other SOT-89 packages. This allows the customer to reduce the total gap.
. Industry standard "gull-wing" design. Less susceptibility to "solder bridging". Allows increased circuit board density.
. Bipolar, unipolar and latching magnetics.
. Low Gauss versions available for high accuracy or wide gap applications.
. SS5 package allows 4-pin package designs
. Brushless DC motors
. Digital current sensor
. Anti-skid braking sensor
. Piston detection in hydraulic cylinder
. Valve position sensing
. Cam, lever, shaft position sensing
. Tachometer, counter pickup
.  Push-button sensor
. Disk speed, tape rotation, flow rate sensing
. Speed sensing - rate, under, over speed
. Remote reading sensor
. Magnetic card reader

SS5 Series Hall effect position sensors are operated by the magnetic field from a permanent magnet or electromagnet. The small SOT89 style package surface mounts on PC boards and flexible circuits.  The SS5 uses a industry standard "gull-wing" design which makes it less susceptible to "solder bridging" and allows increased circuit board density.  The SS5 series package can accommodate larger IC¡¯s than SS1 and allows for four-pin designs
The integrated circuits are designed to provide predictable performance
over the full temperature range of -40 to +150¡ãC. Bipolar, unipolar and latching magnetics are available.  The SS5 has the same footprint and pin.out as the industry standard SOT-89. It will replace Honeywell SS1 Series and any equivalent SOT-89 sensors from other suppliers with minimum or no design changes.
On-board regulation provides extremely stable operation over the full supply voltage range of 4.5 to 24 VDC(SS51T) or 3.8 to 30 VDC(SS500). Current consumption is a low 10 mA maximum at 40¡ãC and is typically 7mA or less at room temperature and above. SS5 sensors are capable of continuous 20 mA sinking output, and can withstand temporary current as high as 20 mA maximum (SS51T) or 50 mA maximum (SS500). They can use existing power supply sources in most applications, and can be directly interfaced with many electronic components without buffering or compensation circuitry.

SS5 Series sensors are supplied on tape and reel for high-volume, automated pick and place equipment. Each reel contains 1,000 sensors.
MICRO SWITCH supplies bar and ring magnets for operating Hall effect sensors. Bar magnets can operate any Hall effect sensor. Ring magnets are magnetized on the outside diameter with alternating North and South poles. They are particularly useful with bipolar sensors and rpm measurement.

Contact person:

Frances New

Phone:+86-755-81832961

Fax:+86-755-83299282

Email:sumzi@sumzi.com

MSN:sumzi-frances@msn.com

http://www.sumzi.com