原装MLX90217齿轮传感器欢迎过来看货！

解决方案

\ Solution

热卖产品

发布时间：2009-12-24 浏览：4698次

MLX90217齿轮传感器

The MLX90217 is a self adjusting digital output rotary position gear tooth sensor designed for use in automotive camshaft sensing as well as other speed sensing applications. It is designed to be used with a bias magnet south facing the back (non-marked) side of the IC. The device has an open collector output which is short circuit protected.

The MLX90217 is a sophisticated IC featuring an on-chip 10-bit A/D Converter and logic that acts as a digital sample and hold circuit. A separate 4-bit A/D converter provides a fixed hysteresis. The 90217 does not have a chopper delay. The 90217 uses a single Hall plate which is immune to rotary alignment problems. The bias magnet can be from 50 to 400mT.

As the signal is sampled, the logic recognizes an increasing or decreasing flux density. The output will turn on (BOP) after the flux has reached its peak and decreased by an amount equal to the hysteresis. Similarly the output will turn off (BOP) after the flux has reached its minimum value and increased by an amount equal to the hysteresis.

MLX90217LUA 型号

MELEXIS品牌下的型号MLX90217LUA

MLX90217LUA 批号 09+
MLX90217LUA 数量大量现货
MLX90217LUA 封装 3-pin SIP

MLX90217LUA 包装 1000PCS/BAG

MLX90217LUA 备注原装现货
MLX90217LUA 技术资料